3M™ Contact Adhesives Water Based

Genfab Catalogue | Adhesives | 3M™ Contact Adhesives Water Based

Section Introduction The family of water dispersed adhesives offers an excellent alternative to solvent based adhesives, without compromising performance. Important in today's highly regulated production environments, every product is non-flammable in the wet state and has a low or no VOC content. As well as the clear health and safety advantages, the expense and problems often associated with container storage and disposal are also drastically reduced. The products may be applied with a spray,roller or brush and can be used to adhere most materials including, polyethylene and polypropylene, expanded polystyrene, high pressure laminates and insulation (glass and rock wool)

3M™ Adhesive and Spray Activator FB2000 20 Litres Ref: 252 A water based activated contact adhesive using a co-spray technique that bonds to handling strength IMMEDIATELY, without the use of drying ovens or other heat sources. The product is applied using suitable spray equipment - please contact us for further information. Typical Applications: laminating kitchen and office counter tops, doors partitions and insulation panels, polyurethane and latex foams, wood, aluminium, protected metals (ie those protected from corrosion), particle board, fabrics, fibre and many plastics. One of each of the substrates to be bonded must be porous or water permeable. Coverage: 25m2 per litre (guidance only dependent on substrate) Colour: Blue or neutral. Neutral sold as standard Per 20 litres Price: £160.05 (Excluding VAT at 20%) Quantity:

3M™ Water Based Contact Adhesive FB30 5 Litre Tin Ref: 251 A water based contact adhesive with high bond strength and long bonding range. Good heat resistance. Post formable. Ideally suited for high performance laminating . The product stays flexible when dry. A coat of adhesive is applied to both substrates, allowed to dry and then joined by clamping and applying high pressure. Applications: bonding foamed plastics, plastic laminate, wood, plywood, wallboard, wood veneer, plaster and canvas to themselves and to each other. Coverage: Brush applied 16m2 per litre (guidance only dependent on substrate) Colour: Wet - turquoise, dry - green Drying Time: Under normal conditions 30 minutes, the bond must be completed within 4 hours. Per 5 Litre Tin Price: £117.61 (Excluding VAT at 20%) Quantity:

Genfab Catalogue | Adhesives | 3M™ Contact Adhesives Water Based