Genfab - Adhesive Products - 3M, Tesa, Nitto, ATG
Adhesives, adhesive tapes and other adhesive products from 3M, ATG, Nitto, Tesa - All your adhesive requirements catered for.
View Cart | Checkout Items:, Value:
 
 Home  Site Map  Search  Checkout  Products Overview  Up a Level  Contact Us 
 
 
Adhesives, adhesive tapes and other adhesive products from 3M, ATG, Nitto, Tesa - All your adhesive requirements catered for. 
 

Main Pages

Browse Products

 

 

Genfab Catalogue | Adhesives |  Anerobic |  Gasket Makers

Gasket Makers

Genfab Catalogue | Adhesives |  Anerobic |  Gasket Makers

Gasket Makers General Information

- Eliminate pre-cut gaskets, reducing weight, inventory and cost
- Improves seal and strength
- For use on water, oil and fuel pumps, electric motor end covers, compressors, thermostat housing and most machined metal faces
- Do not shrink or crack
- Do not sag or run
- Fill surface imperfections, reducing machining costs
Gasket Maker Multi-PurposeGasket Maker Multi-Purpose Ref: GF74

Appearance / Colour: Orange , Gap Fill:0.35mm
Chemical Type / Base: Dimethacrylate,Viscosity cPs:800,000
Constant Temperature Range: -50C to + 150C
Typical Fixture Time: Over 15mins , Full Cure : 24 hours
Loctite Equivalent: 574 Stock Sizes: 50ml,250ml

Applications: A form in place gasketting product designed for multi-purpose applicationson dissimilar metal flanges and surfaces e.g, gearbox casings,machinery covers, pump housings, electric motor end covers. etc.


Call for latest Pricing and Delivery Information

Gasket Maker for Dissimilar FlangesGasket Maker for Dissimilar Flanges Ref: GF18

Appearance / Colour: Red , Gap Fill:0.5mm
Chemical Type / Base: Dimethacrylate,Viscosity cPs:500,000
Constant Temperature Range: -50C to + 150C
Typical Fixture Time: 35 mins, Full Cure : 24 hours
Loctite Equivalent: 518 Stock Sizes: 50ml,250ml

Applications: For use on dissimilar metal flanges and surface, e.g gear box casings,machinery covers pump houses etc.


Call for latest Pricing and Delivery Information

Gasket Maker High Temperature Gasket Maker High Temperature Ref: GF10

Appearance / Colour: Red/Orange , Gap Fill:0.5mm
Chemical Type / Base: Dimethacrylate,Viscosity cPs:425,000
Constant Temperature Range: -50C to + 200C
Typical Fixture Time: 20 mins, Full Cure : 24 hours
Loctite Equivalent: 510 Stock Sizes: 50ml,250ml

Applications: A form in place gasketing product designed for applications on rigid metal flanges and surfaces.Ideal for use in high temperature applications.


Call for latest Pricing and Delivery Information

Genfab Catalogue | Adhesives |  Anerobic |  Gasket Makers



 
 


© 2006 General Fabrications Ltd  Contact Us | Privacy Policy | Terms & Conds